company news about How to use the forged wheel quick change numbering device?

The company has developed a quick-change marking device for forged wheels. Sleeve, locking head, steel ball, spring, wedge pin, set screw and screw; the word block is placed in the groove of the quick change block; the locking head is installed on the umbrella block and connected with the quick change block, The disc spring is placed in the middle; the sleeve is installed in the center hole of the installation block, the steel ball, spring and wedge pin are placed in the round hole on the side of the installation block in sequence, and locked with set screws; the installation block is fixed on the mold; the lock The tightening head is locked by steel balls, and the front and rear sides of the quick-change block fit with the sides of the mold installation groove, so that the quick-change block hangs at the marking position. The mold drives the device to move downward to realize the marking of the character block on the corresponding part of the wheel. Hold the quick-change block to pull down or push the locking head upwards to achieve quick replacement of the device.