company news about What are the passenger car steel wheel spoke punch dies?

The company has developed a passenger car steel wheel spoke air punch die, which consists of an upper die frame with grooves on it. The diagonal block holder is set under the upper die frame and the lower end face is provided with a guide groove. Press holder, one end is located in the groove of the upper die holder, the other end protrudes out of the oblique block holder; Press ring, connected with press base; Guide plate, connected to the bottom of guide groove; Press plate, connected under the oblique block seat, both sides above the guide groove to form T-shaped groove; Sliding block with upper end embedded in T-groove; A push plate, connected to an oblique block seat, on which a screw and a reset spring are provided; One end of the screw is connected with a sliding block; Upper die, one end connected to sliding block; The lower die holder is connected with the upper die holder by a guide pillar. The lower die is provided with a fixed groove; Fixed slider, set in fixing groove of lower die frame; The lower die base is set in the fixing groove of the lower die frame, with the central hole and the discharging guide hole. The positioning seat is arranged in the positioning groove of the lower die base. The lower die is set on the upper end face of the lower die holder and corresponds to the upper die. The discharging ring is set under the lower die base and corresponds to the discharging guide hole around the center hole.