|Material::||Aluminium, Plastic, NICKEL, Nylon, Stainless Steel For Screw Spike||Standard::||GB, DIN, ISO, ANSI, ASME, IFI, JIS|
|Application::||Building, Furniture, Sanitary, Electronics, Traffic For Screw Spike||Surface Treatment:||Phosphated(black,grey), Galvanized(bule,white,color), Ruspert, Dacromet Etc|
|Type Head:||Pan, Flat, Truss, Hex Washer ,Wafer...||Sizes Dia:||#4-#16 (2.5mm-8mm)|
|Name:||Rail Fastening/ Track Spike/ Dog Spike Railroad Rail Sleeper Screw Spike With Round Thread|
Ss25 Railway Track Fasteners,
Hex Railway Track Fasteners,
OEM Rail Screw Spike
Ss25 Railway Track Fasteners , Hex Rail Screw Spike Carbon Steel Material OEM
Rail screw spike, also called sleeper screw, rail screw or lag bolt, is a medium or large metal screw used to fasten a rail tie plates or rail. Rail screw spike is usually made of Q235 steel. Such spikes are always fastened into holes bored into the tie sleeper, sometimes together with imbedded plastic dowels, popularly used for rails with wooden sleepers, especially in America and Canada.
Ss25 Rail Screw Spike Hex Rail Spike Factory Supply High Strength Carbon Steel Road Stud Rail Track Spikes
Railway Spikes, Road studs, a common form of traffic roadblocks, are used to guide people in the right direction and prevent speeding and traffic accidents. Mainly used in road and railway.
A processing technology of a spiral road stud is adopted, and the technical scheme includes the following steps: cutting: cutting a blank according to a set length to form a raw material of the road stud; car tip: cutting one end of the raw material of the road stud to Forming a cone tip; heating: heating the other end of the raw material of the road stud as required; punching: punching the heated end of the raw material of the road stud to form the screw head and backing plate; trimming: after the road stud profile is cooled, start the The prepared punching equipment removes the burrs on the surface of the backing plate; screw heating: start the pre-prepared heating equipment to heat the end of the spike raw material with the tapered tip; wire rolling: start the pre-prepared wire rolling equipment to heat the track obtained by the screw. The raw material of the nail is rolled to form a thread to obtain a screw spike. Thereby, it is convenient to improve the processing quality of the product.
Contact Person: kelly